Global Polyurethane Market 2025: APAC Leads Growth Amid Regional Shifts and Rising Sustainability Priorities
Summary:
1. APAC Dominance: Asia-Pacific remained the largest PU-producing region, recording a surge of 1.5% in production volumes year-on-year, led by India and Indonesia.
2. Regional Performance: EMEA production was supported by Middle East growth, while the Americas declined by 2% amid subdued downstream demand.
3. Product Segment Trends: Rigid and flexible foams collectively accounted for approximately 60% of global PU production, while binders remained the smallest segment at around 3%.
4. Emerging Growth Opportunities: Thermal insulation, refrigeration, automotive lightweighting, infrastructure development and expanding manufacturing activities are expected to drive future PU demand, particularly in India and Southeast Asia.
5. Sustainability and Market Outlook: Global PU production is expected to grow moderately through 2030, supported by increasing adoption of renewable feedstocks, biomass-balanced raw materials, low-VOC systems and chemical recycling technologies.
The global polyurethane (PU) industry experienced mixed growth in 2025, driven by varying economic conditions, construction activity and downstream industrial demand across major regions. Asia-Pacific (APAC) remained the largest producing region, with production figures witnessing an increase of around 1% Y-O-Y. Meanwhile, EMEA production experienced a slight hiccup, while the Americas recorded a decline of 2%.
Rigid and flexible polyurethane foams continued to dominate the global product landscape, collectively accounting for more than half of the total production. On the other hand, binders represented the smallest product category.
However, individual segments experienced different market trends. Flexible foam remained largely stagnant in EMEA, while elastomers production declined. In the Americas, rigid foam recorded the strongest performance, whereas flexible foam and binders faced declining production. APAC experienced relatively stronger growth in flexible foam and elastomers, supported by demand from automotive, furniture, footwear and textile applications.
The regional trends were largely influenced by construction activity, infrastructure investment, manufacturing trends and raw material availability. India and Indonesia emerged as important growth markets in APAC, while the Middle East recorded the strongest performance within EMEA. Conversely, Western Europe and the Americas faced subdued conditions due to elevated operating costs, weaker construction activity and cautious downstream purchasing.
Regional Polyurethane Market Performance

Source: IAL Insights
EMEA: In the EMEA region, Europe accounts for around 82% of regional demand. In 2025, the production declined marginally by 0.4%, reflecting market maturity and subdued construction activity. In contrast, the Middle East recorded the strongest regional growth of nearly 3.5%, supported by infrastructure investment and expanding industrial capacity. Saudi Arabia and the UAE are expected to provide further growth opportunities.
Americas: The total polyurethane production in the Americas declined by 2% in 2025. North America accounted for the largest share of regional output, while South America holds a significantly smaller share. The US dominated the market with more than 60% production share, followed by Brazil and Mexico. In 2025, production declined by 2% in North America and 2.2% in South America. Argentina experienced a particularly sharp contraction of 9%, reflecting currency fluctuations and raw material supply constraints. However, IAL forecasts regional production growth of approximately 1% in 2026.
Asia-Pacific: APAC remained the largest polyurethane-producing region, recording around a 1% year-on-year increase in production. India led regional growth with almost a double-digit increase, followed by Indonesia, supported by urbanisation, infrastructure investment and manufacturing expansion.
China remained the largest producer, although in 2025 growth was limited to less than 1%. On the other hand, Thailand recorded a decline due to weaker refrigeration foam, automotive, footwear and textile production.
Overall, APAC polyurethane production is expected to grow at a CAGR of approximately 3% over the next five years, with India and Southeast Asia providing important growth opportunities.
Product-wise Polyurethane Market Performance Across Regions

Source: IAL Insights
Flexible Foam: In 2025, the production of flexible foam in APAC recorded a growth of 2.6%.
China accounted for 87% of East Asian production, while the production volumes in India surged by almost double digits. Slabstock foam represented more than 60% of flexible foam production in APAC, and moulded foam accounted for the rest.
In contrast to this, flexible foam production declined by 6% in the Americas, reflecting weaker mattress and furniture manufacturing, while EMEA recorded a marginal decline of 0.1%.
Rigid Foam: Rigid foam remained the largest polyurethane product category in the Americas, accounting for more than 30% of regional production and recording growth of approximately 1%.
In APAC, the production increased by 1%, with China accounting for 73% of output. South Asia recorded stronger growth of 10%, supported by demand from insulation panels, cold storage, warehouses and spray foam applications. Refrigeration and construction will remain important demand drivers.
Elastomers: APAC polyurethane increased roughly by 2%. China holds the majority of regional output, while synthetic leather represents nearly half of production. Spandex and fibre elastomers grew approximately by 8%, TPU elastomers also recorded solid growth, and RIM/RRIM elastomers increased by around 4%. However, synthetic leather elastomers declined by a significant margin.
On the other hand, EMEA and the Americas recorded production declines of approximately 2%.
Coatings: In the APAC's polyurethane coatings segment, wood and furniture applications account for nearly 31%. China dominated East Asian production, contributing more than 80% of the total production. The production in South Asia is majorly concentrated in India. Meanwhile, in the Americas, coatings production increased by 0.8%. The shift towards low-VOC, solvent-free and environmentally compliant coating systems is expected to influence future market development.
Adhesives and Sealants: APAC production increased marginally in 2025, with adhesives accounting for most of the production volume among the two. In adhesives, flexible packaging and footwear adhesives were the largest segments. China dominated East Asian production, while India accounted for 95% of South Asian output. Vietnam and Indonesia recorded strong growth. However, in the Americas, production increased marginally by 0.3%, supported by demand across construction, automotive and packaging applications.
Binders: Polyurethane binders remained the smallest product category globally, accounting for approximately 3.5% of production. APAC production increased by 1%, supported by growth of 8.6% in India and 3% in China, despite declines in Japan, Malaysia and Taiwan. In the Americas, production declined by 5.6%, mainly due to weaker single-family housing construction in the US. Competition from lower-cost furan and urea-formaldehyde binders continues to restrict adoption across several APAC applications.
Author: Agrim Thapliyal
Source: IAL Insights
To learn more about our reports, please see the link below:
For more information, please contact:
IAL Consultants
CP House, 97107 Uxbridge Road
Ealing
London W5 5TL
Telephone: +44 20 8832 7780
Email: ial@brggroup.com
Or visit our website: www.ialconsultants.com



